리눅스 용량 확장 명령어 resize2fs 사용법 (Nothing to do! 나올때)

아래 접은 내용은 오래된 내용이고 최근에는 fdisk 를 사용하지 않고 growpart /dev/디바이스와파티션숫자까지  를 사용합니다.

이런식입니다.

[vitta@server ~]# growpart /dev/nvme1n1 1
CHANGED: partition=1 start=2048 old: size=2147481567 end=2147483615 new: size=4294965215 end=4294967263
[vitta@server ~]# resize2fs /dev/nvme1n1p1
resize2fs 1.42.9 (28-Dec-2013)
Filesystem at /dev/nvme1n1p1 is mounted on /home; on-line resizing required
old_desc_blocks = 128, new_desc_blocks = 256
The filesystem on /dev/nvme1n1p1 is now 536870651 blocks long.

[vitta@server ~]# growpart /dev/nvme1n1 1 
CHANGED: partition=1 start=2048 old: size=2147481567 end=2147483615 new: size=4294965215 end=4294967263 
[vitta@server ~]# resize2fs /dev/nvme1n1p1 
resize2fs 1.42.9 (28-Dec-2013) Filesystem at /dev/nvme1n1p1 is mounted on /home; on-line resizing required old_desc_blocks = 128, new_desc_blocks = 256 The filesystem on /dev/nvme1n1p1 is now 536870651 blocks long.

 

자세한 내용은 아래내용 클릭!

2018.11.16 - [클라우드] - AWS EBS 데이터 손실 없는 nvme 디스크 확장

 

더보기 내용은 과거 root volume 증설 시 사용했던 명령집. 참고 안하셔도 됩니다.

---

EC2 의 CENTOS 의 경우 8G 정도의 Root 볼륨이 할당됩니다. 약간 작아 20G로 resize2fs 시켜 사용중이었는데 6.7 버전부터 resizefs /dev/xvda1 을 하면 

The filesystem is already 2096896 blocks long.  Nothing to do!

라는 메세지가 발생합니다.

이를 해결하기 위해 아래의 방법을 실행합니다.

 이는 시작 섹터를 변경하여  이전 파티션을 삭제하고 동일한 파티션 번호를 새로 생성하게 하는 것입니다. 잘못될 경우 부팅에 실패할 수 있으므로, 사용 중인 시스템에서는 백업이 필수라 여겨집니다. 

 

[root@cateye ~]$ lsblk NAME    MAJ:MIN RM SIZE RO TYPE MOUNTPOINTxvda    202:0    0  20G  0 disk └─xvda1 202:1    0   8G  0 part /

[root@cateye ~]# resize2fs /dev/xvda1

resize2fs 1.41.12 (17-May-2010)The filesystem is already 2096896 blocks long.  Nothing to do!
[root@cateye ~]# resize2fs /dev/xvdaresize2fs 1.41.12 (17-May-2010)resize2fs: Device or resource busy while trying to open /dev/xvdaCouldn't find valid filesystem superblock.[root@cateye ~]# df -hFilesystem      Size  Used Avail Use% Mounted on/dev/xvda1      7.8G  943M  6.5G  13% /tmpfs           938M     0  938M   0% /dev/shm[root@cateye ~]# fdisk /dev/xvda
WARNING: DOS-compatible mode is deprecated. It's strongly recommended to         switch off the mode (command 'c') and change display units to         sectors (command 'u').
Command (m for help): uChanging display/entry units to sectors
Command (m for help): p
Disk /dev/xvda: 21.5 GB, 21474836480 bytes255 heads, 63 sectors/track, 2610 cylinders, total 41943040 sectorsUnits = sectors of 1 * 512 = 512 bytesSector size (logical/physical): 512 bytes / 512 bytesI/O size (minimum/optimal): 512 bytes / 512 bytesDisk identifier: 0x00057cbb
    Device Boot      Start         End      Blocks   Id  System/dev/xvda1   *        2048    16777215     8387584   83  Linux
Command (m for help): dSelected partition 1
Command (m for help): nCommand action   e   extended   p   primary partition (1-4)pPartition number (1-4): 1First sector (63-41943039, default 63): 2048Last sector, +sectors or +size (2048-41943039, default 41943039): ENTERUsing default value 41943039
Command (m for help): p
Disk /dev/xvda: 21.5 GB, 21474836480 bytes255 heads, 63 sectors/track, 2610 cylinders, total 41943040 sectorsUnits = sectors of 1 * 512 = 512 bytesSector size (logical/physical): 512 bytes / 512 bytesI/O size (minimum/optimal): 512 bytes / 512 bytesDisk identifier: 0x00057cbb
    Device Boot      Start         End      Blocks   Id  System/dev/xvda1            2048    41943039    20970496   83  Linux
Command (m for help): aPartition number (1-4): 1
Command (m for help): wThe partition table has been altered!
Calling ioctl() to re-read partition table.
WARNING: Re-reading the partition table failed with error 16: Device or resource busy.The kernel still uses the old table. The new table will be used atthe next reboot or after you run partprobe(8) or kpartx(8)Syncing disks.

 

[root@cateye ~]# reboot
Broadcast message from root@cateye

---

[root@cateye ~]$ lsblk NAME    MAJ:MIN RM SIZE RO TYPE MOUNTPOINTxvda    202:0    0  20G  0 disk └─xvda1 202:1    0  20G  0 part /[root@cateye ~]$ df -hFilesystem      Size  Used Avail Use% Mounted on/dev/xvda1       20G  947M   18G   5% /

 

tmpfs           938M     0  938M   0% /dev/shm

 

 

위의 내용은 제가 직접 실행한 내용이고, 아래에 설명을 따라했습니다. 가급적이면 원본 사이트에가서 참조하시기 바랍니다.

---

 

To expand on JD's self-accepted answer, here's exactly what to do:

df -h #print the name of your boot partition

lsblk #show info on all your block devices

You'll see from that output what the name of the disk is of your root partition. For example, you probably see something like this:  xvde 202:64 0 32G 0 disk └─xvde1 202:65 0 8G 0 part /

Our goal is to make xvde1 use the whole available space from xvde. Here's how your resize your partition:

fdisk /dev/xvda (the disk name, not your partition) This enters into the fdisk utility.

1. u #Change the display to sectors
2. p #Print info
3. d #Delete the partition
4. n #New partition
5. p #Primary partition
6. 1 #Partition number
7. 2048 #First sector
8. Press Enter to accept the default
9. p #Print info
10. a #Toggle the bootable flag
11. 1 #Select partition 1
12. w #Write table to disk and exit

Now, reboot your instance: reboot

After it comes back do:

resize2fs /dev/xvde1 (the name of your partition, not the block device)

And finally verify the new disk size: df -h

1 출처는 여기

http://stackoverflow.com/questions/26770655/ec2-storage-attached-at-sda-is-dev-xvde1-cannot-resize